AACRanger 5 Mini
6mm / .243 suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Low Backpressure
- TBAC Summit Tested
- Full-Auto Rated
- Sealed
length
4.98″
weight
9.84oz
MSRP
$850
length
4.98″
weight
9.84oz
calibers
5.56 | 6mm
material
Steel · Inconel
interface
HUB 1.375x24
MSRP
$850
- Overall length
- 4.98″
- Class
- 6mm / .243
- n
- 72
- Range
- 3″–8.8″
- Median
- 5.9″
- Diameter
- 1.5″
- Class
- 6mm / .243
- n
- 67
- Range
- 1.49″–1.83″
- Median
- 1.63″
- Weight
- 9.84 oz
- Class
- 6mm / .243
- n
- 73
- Range
- 6.2 oz–21.9 oz
- Median
- 13.54 oz
- Material
- 718 Inconel, 17-4 Stainless Steel
- Max caliber
- 6mm ARC
- Base interface
- HUB 1.375x24
- Front cap
- Removable
- Backpressure
- Low
- Full-auto rated
- Yes
- Maintenance
- Sealed (not user serviceable)
- MSRP
- $850
- Class
- 6mm / .243
- n
- 66
- Range
- $520–$1,529
- Median
- $963
Shorter than most 6mm / .243 suppressors
Length compared against the 72 6mm / .243 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Narrower than most 6mm / .243 suppressors
Diameter compared against the 67 6mm / .243 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most 6mm / .243 suppressors
Weight compared against the 73 6mm / .243 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most 6mm / .243 suppressors
MSRP compared against the 66 6mm / .243 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Is something on this page wrong?
- Base interface
- HUB 1.375x24
- Front cap
- Removable
The HUB 1.375x24 is an open standard: 494 mounts and 940 muzzle devices in our catalog fit this suppressor, including AAC 51T S.T.A.M.P. Mount, AB Suppressor AB Raptor Adapter and Abel Co Direct Thread Adapter 1/2x28. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Ranger 5 Mini was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Gas-operated rifles and carbines
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Full-auto rated.
- Rated 24 dB reduction.
- 24 dB reduction; 138 dB measured on a MK18 with XM193 ammunition.
- On 10.3-inch or longer barrels it is below the 140 decibel OSHA safety threshold.
Show all 9 ▾ ▴
- Fully-welded Inconel 718 and 17-4 stainless baffles with an oversized bored 6mm baffle for reduced backpressure; 1.375 HUB compatible with a removable front end cap.
- Removable front end cap; oversized 6mm bored baffle for reduced backpressure.
- Fully welded Inconel 718 and 17-4 stainless steel baffles for durability on short barrels and intensive schedules of fire.
- Ultra-compact silencer for CQC rifles and carbines chambered in .223/5.56; on 10.3" or longer barrels it is below the 140-decibel OSHA threshold.
- Ships with a direct-thread mount in 1/2-28 with a built-in muzzle brake.
Is one of these wrong, or does our wording say something the source doesn't?
