Abel CoBiscuit-S
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Sealed
length
4.7″
weight
13.2oz
MSRP
$760
length
4.7″
weight
13.2oz
calibers
5.56–.30
material
Steel
interface
HUB 1.375x24
MSRP
$760
- Overall length
- 4.7″
- Class
- .30 Cal / 7.62mm
- n
- 628
- Range
- 2.5″–14″
- Median
- 7.25″
- Diameter
- 1.85″
- Class
- .30 Cal / 7.62mm
- n
- 599
- Range
- 1.36″–2.74″
- Median
- 1.62″
- Weight
- 13.2 oz
- Material
- 17-4 H900 Stainless Steel
- Finish / treatment
- High Temp Cerakote (C Series), Raw
- Max caliber
- .30
- Base interface
- HUB 1.375x24
- Maintenance
- Sealed (not user serviceable)
- MSRP
- $760
- Class
- .30 Cal / 7.62mm
- n
- 557
- Range
- $199–$2,380
- Median
- $995
Shorter than most .30 Cal / 7.62mm suppressors
Length compared against the 628 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Wider than most .30 Cal / 7.62mm suppressors
Diameter compared against the 599 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most .30 Cal / 7.62mm suppressors
MSRP compared against the 557 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 468 mounts and 882 muzzle devices in our catalog fit this suppressor, including Abel Co Direct Thread Adapter 1/2x28, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Decibel rating: L/R ear 145-146db (AI AT, 20" .308, 175gr FGMM).
- 100% laser welded tubeless baffle stack; the Biscuit line is fully welded and the exit caps are not removable.
- Industry-standard 1-3/8x24 threaded HUB, so shooters can keep their existing muzzle devices and use a wide variety of Abel Company adapters.
- Design goals: reduce dB to a manageable level (~140), mitigate back-pressure via a higher flow rate, minimize or eliminate POI shift, and keep length short.
Show all 7 ▾ ▴
- 17-4 H900 stainless steel with a high-temp Cerakote (C Series) finish.
- Hard-use class can that can be run in a CQB environment and on a precision bolt gun alike.
- Barrel length minimums: .223/5.56 10.3", 300BLK 7", .308 16", 300WM 22", 300PRC 22".
