Abel CoTheorem 6MM
6mm / .243 suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Sealed
length
7″
weight
10.5oz
MSRP
$1,195
length
7″
weight
10.5oz
calibers
5.56 | 6mm
material
Titanium
interface
HUB 1.375x24
MSRP
$1,195
- Overall length
- 7″
- Class
- 6mm / .243
- n
- 72
- Range
- 3″–8.8″
- Median
- 5.9″
- Diameter
- 1.75″
- Weight
- 10.5 oz
- Material
- 100% 6AL4V Titanium (Grade 5)
- Finish / treatment
- Black, FDE, High Temp Cerakote (C Series)
- Max caliber
- 6mm
- Base interface
- HUB 1.375x24
- Maintenance
- Sealed (not user serviceable)
- MSRP
- $1,195
- Class
- 6mm / .243
- n
- 66
- Range
- $520–$1,529
- Median
- $963
Longer than most 6mm / .243 suppressors
Length compared against the 72 6mm / .243 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Pricier than most 6mm / .243 suppressors
MSRP compared against the 66 6mm / .243 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Is something on this page wrong?
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 494 mounts and 940 muzzle devices in our catalog fit this suppressor, including Abel Co Direct Thread Adapter 1/2x28, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Decibel rating: ears 132db, muzzle 140db (Accuracy International ATX, 24" barrel, Hornady 6mm Creedmoor).
- 100% laser welded tubeless baffle stack.
- Uses the standard 1-3/8x24 threaded HUB, so common HUB adapters work; furnished with an interchangeable front end/exit cap.
- Maintains the performance attributes of the 30 cal Theorem, but optimized for 6mm usage.
Show all 8 ▾ ▴
- 100% 6AL4V (Grade 5) titanium with a high-temp Cerakote (C Series) finish.
- Ships with a closed front end/exit cap, a multi-tool, and a 5/8x24 HUB direct thread adapter.
- Although it can be used with select-fire weapon systems, it is not recommended for hard use over extended periods; prolonged heat may void the warranty.
- Barrel length minimums: .223/5.56 10.3", 6mm 12".
Is one of these wrong, or does our wording say something the source doesn't?
