BOE SuppressionIncoLite 9
9mm / .36 Cal suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Low Backpressure
- Full-Auto Rated
Where to buy
Prices update nightly
Guns.com
Shop links go to retailer sites; we may earn a commission. Prices shown as of our last check and may differ at checkout.
length
5″
weight
6.5oz
length
5″
weight
6.5oz
calibers
9mm
material
Inconel
interface
HUB 1.375x24
Photos
Image: BOE Suppression
- Overall length
- 5″
- Class
- 9mm / .36 Cal
- n
- 260
- Range
- 2.5″–13.7″
- Median
- 6.75″
- Diameter
- 1.5″
- Weight
- 6.5 oz
- Class
- 9mm / .36 Cal
- n
- 255
- Range
- 2.5 oz–25 oz
- Median
- 9.52 oz
- Material
- 3D Printed Inconel 718
- Max caliber
- 9mm
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
- Backpressure
- Low
- Full-auto rated
- Yes
Shorter than most 9mm / .36 Cal suppressors
Length compared against the 260 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most 9mm / .36 Cal suppressors
Weight compared against the 255 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Is something on this page wrong?
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
The HUB 1.375x24 is an open standard: 494 mounts and 940 muzzle devices in our catalog fit this suppressor, including AAC 51T S.T.A.M.P. Mount, AB Suppressor AB Raptor Adapter and Abel Co Direct Thread Adapter 1/2x28. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- At only 4 inches in length, the IncoLite 9S claims sound performance competitive with 5-inch and 6-inch suppressors.
- The IncoLite 9S is fully 3D-printed from Inconel 718, using creative geometry to add strength where needed and cut weight where it is not.
- The IncoLite 9S includes a direct thread mount that allows operation on a pistol without a booster.
- The IncoLite 9S is 1.375-inch HUB / Bravo threaded, providing broad mounting flexibility across host firearms.
Show all 7 ▾ ▴
- Inconel 718 was chosen over titanium because titanium is not considered sufficient for real, hard use in a compact 9mm suppressor application.
- The IncoLite 9S is specifically designed for 9mm platforms and is optimized for compact, hard-use applications including pistol hosts.
- The suppressor is designed to fill a market niche for an extremely short yet lightweight 9mm suppressor capable of sustained, real-world use.
Is one of these wrong, or does our wording say something the source doesn't?
