BOSS SilencersTop Shot
6.5mm / .264 suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Modular Length
- Brake on the Front of the Suppressor
- TBAC Summit Tested
- Full-Auto Rated
length
6.15–6.75″
weight
12.7oz
MSRP
$1,150
length
6.15–6.75″
weight
12.7oz
calibers
5.56–6.5
material
Titanium · Steel · Aluminum
interface
HUB 1.375x24
MSRP
$1,150
Photos
Image: BOSS Silencers
- Overall length
- 6.75″
- Diameter
- 1.5″
- Weight
- 12.7 oz
- Material
- 17-4 H900 Stainless Steel / Grade 9 Titanium / 6061-T6 Aluminum
- Finish / treatment
- Type III Hard Coat Anodized
- Max caliber
- 6.5mm / .264
- Base interface
- HUB 1.375x24
- Front cap
- BOSS 1.5in Endcap
- Full-auto rated
- Yes
- Brake on the front
- Comes with a brake end cap that screws onto the front of the suppressor
- Brakes that fit:
- BOSS Silencers Brake End Cap (1.5in)
- BOSS Silencers Recoil X Comp Brake End Cap (1.5in)
- MSRP
- $1,150
- Class
- 6.5mm / .264
- n
- 44
- Range
- $260–$1,260
- Median
- $980
Pricier than most 6.5mm / .264 suppressors
MSRP compared against the 44 6.5mm / .264 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Configurations
- B.O.S.S Top Shot brake6.15″ · 12.3oz
- Recoil X .30 brake6.75″ · 12.7oz
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Is something on this page wrong?
- Base interface
- HUB 1.375x24
- Front cap
- BOSS 1.5in Endcap
The HUB 1.375x24 is an open standard: 494 mounts and 940 muzzle devices in our catalog fit this suppressor, including BOSS Silencers Direct Thread Adapter, HUB (1/2x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Top Shot was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Gas-operated rifles and carbines
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Based on our years of PRS experience, our team shooters have thoroughly tested and proven the Top Shot to be an ultra-effective competition silencer that manages your recoil while still eliminating that painful muzzle blast, especially when shooting positional.
- The unique brake end cap re-accelerates the remaining gasses into the brake chambers, maximizing muzzle control. We only offer the Top Shot in a stainless steel configuration, which is necessary to manage heat in between stages.
- The B.O.S.S Top Shot end cap configuration is 1.5" x 6.15" and 12.3oz without mount; the Recoil X .30 brake configuration is 1.5" x 6.75" and 12.7oz without mount.
- The Recoil X .30 brake is made from 6061 T6 type III hard anodized black aluminum with a heat treated 17-4 SS jam nut.
Show all 7 ▾ ▴
- The BOSS Top Shot is our dedicated 6.5mm PRS competition silencer that provides the best balance of muzzle control and sound suppression when seeing your hits and staying on target is critical for rapid follow-up shots.
- We'll send you a free custom-made Armageddon Gear silencer cover to reduce the disruptive mirage in your rifle scope -- just put in a request on our Support page once you receive your Top Shot.
- Includes a direct thread mount in 5/8 - 24, but accepts any standard HUB 1.375-24 pattern mount, including SilencerCo ASR Bravo, or DeadAir Keymo, as examples.
Is one of these wrong, or does our wording say something the source doesn't?
