CanikVOID-9
9mm / .36 Cal suppressor · 1.125x28 interface · specs and compatibility from the manufacturer
Notable features
- Multi-Caliber
- TBAC Summit Tested
length
6″
weight
7.5oz
MSRP
$850
length
6″
weight
7.5oz
calibers
.30 | 9mm
material
Titanium
interface
1.125x28
MSRP
$850
- Overall length
- 6″
- Diameter
- 1.38″
- Weight
- 7.5 oz
- Material
- Grade 5 Titanium
- Finish / treatment
- Black Cerakote
- Max caliber
- 9mm
- Rated cartridges
- 9x19MM, .300 Blackout, .357 Magnum, .338 ARC
- Base interface
- 1.125x28
- Front cap
- Canik VOID-9 Endcap
- On .300 Blackout
- Firing limit
- Subsonic: no restrictions; supersonic: semi-auto, 9" min barrel
- On .357 Magnum
- 8″ minimum barrel
- On .338 ARC
- Firing limit
- Subsonic: no restrictions; supersonic: semi-auto, 9" min barrel
- MSRP
- $850
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Is something on this page wrong?
- Base interface
- 1.125x28
- Front cap
- Canik VOID-9 Endcap
The 1.125x28 is an open standard: 10 mounts and 263 muzzle devices in our catalog fit this suppressor, including Canik VOID-9 Booster Assembly, Griffin Armament EZ-LOK™ Mount Interfaces (Various Pitches) 1.125x28 and HUXWRX Booster Assembly (.578x28). You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. VOID-9 was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Rated for 9x19MM, for .300 Blackout and .338 ARC in both subsonic and supersonic loadings, and for .357 Magnum in lever action rifles.
- The CANiK VOID-9 is a lightweight and ergonomic 9mm suppressor designed for compatibility with both handguns and PCCs.
- With interchangeable end caps, this suppressor offers ultimate quiet with the solid end cap or premium performance and lowered back pressure with the vented end cap.
- Utilizing its 1.125x28 rear threads, the VOID-9 can use other mounting options for specific platforms like PCC's and rifles.
Show all 13 ▾ ▴
- Canik lists the VOID-9 at 6" long and 1.375" in diameter, weighing 7.5 ounces, in titanium with a black Cerakote finish.
- CANiK VOID suppressors ship direct-thread ready and are intended to be mounted to a 90 degree shoulder; a tapered barrel shoulder needs an appropriate tapered cap to convert it to a 90 degree mounting surface.
- Additive Manufactured from Grade 5 Titanium, this design offers durability while remaining lightweight and ergonomic.
- CANiK warrants the suppressor to be free from defects in material, workmanship, and mechanical function when used under normal and intended conditions, and will repair or replace a defective suppressor at its discretion.
- Whether you are using the VOID-9 on your pistol at the range or on a PCC while shooting at a competition, the VOID-9 offers configuration options that allow it to adapt and overcome.
- The unique integrated booster assembly, which includes a 1/2x28 piston, neilson device spring and a piston retainer, allows for functionality across a wide array of pistol platforms.
- Minimum barrel lengths: 9x19MM no restrictions; .300 Blackout and .338 ARC sub-sonic no restrictions; .300 Blackout and .338 ARC supersonic 9 inch barrel, semi auto; .357 Magnum lever action rifles 8 inch barrel.
- For use on firearms with fixed barrels, a direct thread adapter (sold seperately) will need to be installed replacing the piston, piston retainer and piston spring.
- Do not use cleaning patches inside the bore, and do not use a steel wire brush or an ultra sonic cleaner, as they may damage the finish.
Is one of these wrong, or does our wording say something the source doesn't?
