CGS GroupHyperion-K
.30 Cal / 7.62mm suppressor · 5/8x24 Direct Thread interface · specs and compatibility from the manufacturer and independent testers
Notable features
- Multi-Caliber
- PEW Science Reviewed
- TBAC Summit Tested
- Full-Auto Rated
- Direct Thread
length
6.4″
weight
10.5oz
MSRP
$1,599
length
6.4″
weight
10.5oz
calibers
5.56–.30
material
Titanium
interface
5/8x24 Direct Thread
MSRP
$1,599
- Overall length
- 6.4″
- Diameter
- 1.75″
- Weight
- 10.5 oz
- Class
- .30 Cal / 7.62mm
- n
- 621
- Range
- 4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- Grade 5 Titanium
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- 5/8x24 Direct Thread
- Front cap
- CGS Hyperion Front
- Backpressure
- Standard
- Full-auto rated
- Yes
- Barrel restriction
- 10" minimum
- MSRP
- $1,599
- Class
- .30 Cal / 7.62mm
- n
- 557
- Range
- $199–$2,380
- Median
- $995
Lighter than most .30 Cal / 7.62mm suppressors
Weight compared against the 621 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Pricier than most .30 Cal / 7.62mm suppressors
MSRP compared against the 557 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- 5/8x24 Direct Thread
- Front cap
- CGS Hyperion Front
This suppressor threads straight onto the barrel, so no mount is required. 7 mounts in our catalog are thread adapters that let it run on other barrel threads.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Hyperion-K was measured in 2 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Gas-operated rifles and carbines
Measurements published by Thunder Beast Arms Corp. How to read these
Measured sound results are in the Sound tests section above.
PEW Science · independent test
This suppressor has been independently sound-tested by PEW Science in 2 reviews.
Manufacturer claim
- Features patent-pending proprietary technology described as unlike anything previously seen in the firearms industry, enabling peak sound reduction and extreme flash signature reduction.
- Constructed of Direct Metal Laser Sintered (DMLS) 3D-printed, heat-treated Grade 5 titanium.
- Gas flow path geometry vents gas expediently to the outer annulus, contributing to durability and performance.
- Engineered for minimal and repeatable point of impact shift.
Show all 13 ▾ ▴
- Available in 5/8x24 TPI direct thread mount configuration.
- This unique design allows for peak sound reduction and extreme reduction in flash signature as well as minimal and repeatable point of impact shift.
- Designed and manufactured in Artesia,New Mexico USA by CGS Suppressors LLC,a division of CGS Group LLC.
- DMLS-produced titanium grain structure can exhibit uniformity superior to that of traditionally produced alloy structures, contributing to enhanced durability.
- The HYPERION K is constructed of 3-D printed titanium.
- Due to the gas flow path geometry which vents gas expediently to the outer annulus, coupled with the uniform construction and proprietary heat treat process, it is postulated that the Hyperion exhibits higher durability not typically characteristic of titanium suppressors.
- Proprietary heat treat process combined with uniform DMLS construction is postulated to give the Hyperion higher durability not typically characteristic of titanium suppressors.
- Designed specifically for 7.62mm ammunition, supporting calibers up to and including 300 RUM.
- Find out more Custom Rifles Tactical Rifles Hunting Rifles Target Rifles Suppressors Hydra MOD9 Nautilus - 45 AL Hyperion QD 762 Helios DT Manuals Manuals Firing Device Pandora Firing Device Facebook Instagram © CGS Group LLC.
Unattributed
- Unique design allows for peak sound reduction and extreme reduction in flash signature as well as minimal and repeatable point of impact shift.
- Patent pending proprietary technology unique to CGS Group LLC rifle silencers is unlike anything the firearms industry has ever seen before.
- Designed and manufactured in Artesia, New Mexico USA by CGS Suppressors LLC, a division of CGS Group LLC.
- Constructed of 3-D printed titanium (DMLS - Direct Metal Laser Sintered).
Show all 8 ▾ ▴
- Grain structure of DMLS produced titanium can actually exhibit uniformity that is superior to that of traditionally produced alloy structures.
- Heat treated Grade 5 Titanium construction.
- Due to the gas flow path geometry which vents gas expediently to the outer annulus, coupled with the uniform construction and proprietary heat treat process, the Hyperion exhibits higher durability not typically characteristic of titanium suppressors.
- Available in 5/8X24TPI thread pitch.
