Dead AirLazarus 6
6mm / 6.5mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer and independent testers
Notable features
- HUB Compatible
- Low Backpressure
- No Barrel Restrictions
- PEW Science Reviewed
- TBAC Summit Tested
- Haynes 282
- Full-Auto Rated
length
5.7″
weight
16.5oz
MSRP
$1,059
length
5.7″
weight
16.5oz
calibers
5.56 | 6.5
material
Steel · Haynes 282
interface
HUB 1.375x24
MSRP
$1,059
Photos
Image: Dead Air
- Overall length
- 5.7″
- Diameter
- 1.63″
- Weight
- 16.5 oz
- Class
- 6mm / 6.5mm
- n
- 123
- Range
- 4.4 oz–23.9 oz
- Median
- 12.5 oz
- Material
- Haynes 282 / 17-4
- Finish / treatment
- High-Temp Cerakote, Nitride
- Max caliber
- 6mm / .223
- Base interface
- HUB 1.375x24
- Front cap
- Dead Air R-Series
- Backpressure
- Low
- Full-auto rated
- Yes
- Barrel restriction
- None (manufacturer stated)
- Barrel length restrictions: None.
- MSRP
- $1,059
Heavier than most 6mm / 6.5mm suppressors
Weight compared against the 123 6mm / 6.5mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- Dead Air R-Series
The HUB 1.375x24 is an open standard: 468 mounts and 882 muzzle devices in our catalog fit this suppressor, including Dead Air HUB Fixed Mount .578x28, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Lazarus 6 was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Gas-operated rifles and carbines
Measurements published by Thunder Beast Arms Corp. How to read these
Measured sound results are in the Sound tests section above.
PEW Science · independent test
This suppressor has been independently sound-tested by PEW Science.
Manufacturer claim
- The Lazarus 6 KeyMo GOV adapter meets the needs of law enforcement and military customers who require secondary retention for quick-detach silencers.
- The KeyMo GOV adapter body and front cap are torqued into position at the factory with Rocksett™.
- The Lazarus 6 uses the patented Triskelion™ Gas Management System, which offers exceptional sound reduction at the muzzle and at the shooter's ear with minimal back pressure.
- The Triskelion™ Gas Management System helps keep gas out of the shooter's face while reducing wear on the firearm.
Show all 18 ▾ ▴
- The front cap, although torqued with Rocksett™, can easily be replaced in the event of an inadvertent end-cap strike.
- Mount: Xeno, KeyMo, KeyMo GOV; Dead Air HUB Compatible.
- Uses the patented Triskelion Gas Management System, offering sound reduction at the muzzle and at the shooter’s ear with minimal back pressure.
- The KeyMo GOV adapter provides secondary retention for quick-detach silencers; the adapter body and front cap are torqued into position at the factory with Rocksett.
- The Lazarus 6 body is 3D-printed from Haynes® 282, a precipitation-strengthened, nickel-based superalloy designed for extreme-duty use.
- The KeyMo GOV adapter system is machined from 17-4 PH stainless steel and finished with an FNC coating for enhanced corrosion resistance in humid and/or wet conditions.
- Materials: Haynes® 282 and 17-4 PH Stainless Steel.
- Finish: Black or Flat Dark Earth high temperature Cerakote®; Nitride adapter, mount, and front cap.
- The body is 3D-printed from Haynes 282, a precipitation-strengthened nickel-based superalloy designed for extreme-duty use; the KeyMo GOV adapter system is machined from 17-4 PH stainless steel with an FNC coating for corrosion resistance.
- The Lazarus 6 is designed to withstand the most demanding firing schedules and harshest environments.
- Designed to withstand the most demanding firing schedules and harshest environments; the front cap can be replaced in the event of an inadvertent end-cap strike.
- Usage: Ideal for hard use and heavy firing schedules.
- Caliber rating: Full Auto rated for 5.56 NATO and 6mm ARC.
- Barrel length restrictions: None.
Unattributed
- The Lazarus 6 uses the patented Triskelion™ Gas Management System, which offers exceptional sound reduction at the muzzle and, especially, at the shooter's ear, with minimal back pressure.
- Helps keep gas out of your face while reducing wear on your firearm.
- The KeyMo GOV adapter meets the needs of law enforcement and military customers alike who require secondary retention for quick-detach silencers.
- The adapter body, as well as the front cap, are torqued into position at the factory with Rocksett™.
Show all 11 ▾ ▴
- The Lazarus 6 body is 3D-printed from Haynes® 282, a precipitation-strengthened, nickel-based superalloy designed for extreme-duty use.
- The KeyMo GOV adapter system is machined from 17-4 PH stainless steel and finished with an FNC coating for enhanced corrosion resistance in humid and/or wet conditions.
- Finished with Black or Flat Dark Earth high temperature Cerakote®; Nitride adapter, mount, and front cap.
- State-of-the-art silencer designed to withstand the most demanding firing schedules and harshest environments.
- The front cap, although torqued with Rocksett™, can easily be replaced in the event of an inadvertent end-cap strike.
- Ideal for hard use and heavy firing schedules.
- What's Included: TL Tool Pack, Xeno Adapter 1/2-28, Xeno 3-Prong Flash Hider (LZ6XN | LZ6KM), 1/2-28 Keymicro Flash Hider, Keymo Adapter, TL Tool Pack.
