Diligent Defense Co.Wolf Hunter 6mm
6mm / .243 suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- TBAC Summit Tested
length
6.75″
weight
9.1oz
MSRP
$800
length
6.75″
weight
9.1oz
calibers
5.56 | 6mm
material
Titanium
interface
HUB 1.375x24
MSRP
$800
- Overall length
- 6.75″
- Class
- 6mm / .243
- n
- 72
- Range
- 3″–8.8″
- Median
- 5.9″
- Diameter
- 1.63″
- Weight
- 9.1 oz
- Class
- 6mm / .243
- n
- 73
- Range
- 6.2 oz–21.9 oz
- Median
- 13.54 oz
- Material
- Titanium
- Finish / treatment
- Graphite Black, Mill Finish
- Max caliber
- .243 Cal / 6mm
- Base interface
- HUB 1.375x24
- Front cap
- Dead Air R-Series
- MSRP
- $800
- Class
- 6mm / .243
- n
- 66
- Range
- $520–$1,529
- Median
- $963
Longer than most 6mm / .243 suppressors
Length compared against the 72 6mm / .243 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most 6mm / .243 suppressors
Weight compared against the 73 6mm / .243 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most 6mm / .243 suppressors
MSRP compared against the 66 6mm / .243 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Is something on this page wrong?
- Base interface
- HUB 1.375x24
- Front cap
- Dead Air R-Series
The HUB 1.375x24 is an open standard: 494 mounts and 940 muzzle devices in our catalog fit this suppressor, including Diligent Defense Co. Ti Direct Thread Adapter (1/2x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Wolf Hunter 6mm was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Gas-operated rifles and carbines
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Calibers: Up to 6mm (bore 0.281″)
- Min barrel: 6mm and 556 - 10-1/2″
- This suppressor is made from Titanium to keep the weight down.
- It is very strong but subject to strength loss at high heat.
Show all 14 ▾ ▴
- We recommend to keep Suppressor below 800 degrees.
- The Wolf Hunter Suppressor is our 6mm hunting can.
- It's best used where maximum suppression is needed in a light weight package.
- It's compact length (6-3/4″) allows great performance on calibers 6mm and below.
- No BS lifetime warranty when following barrel length and firing schedules.
- Direct thread included: 1/2″x28 and 5/8″x24
- Includes Wolf Hunter suppressor
- Includes 1/2″x28 direct thread
- Includes 5/8″x24 direct thread
- Mounting options: Anything Bravo or 1-3/8x24 thread
Is one of these wrong, or does our wording say something the source doesn't?
