ECCO MachineCanine II
9mm / .36 Cal suppressor · Direct Thread (multiple) interface · specs and compatibility from the manufacturer
Notable features
- Runs on a Handgun Without a Booster
- TBAC Summit Tested
- Full-Auto Rated
- Sealed
- Direct Thread
length
4″
weight
2.8oz
MSRP
$479
length
4″
weight
2.8oz
calibers
9mm | .35
material
Titanium
interface
Direct Thread (multiple)
MSRP
$479
- Overall length
- 4″
- Class
- 9mm / .36 Cal
- n
- 260
- Range
- 2.5″–13.7″
- Median
- 6.75″
- Diameter
- 1.3″
- Class
- 9mm / .36 Cal
- n
- 250
- Range
- 1″–2.13″
- Median
- 1.5″
- Weight
- 2.8 oz
- Class
- 9mm / .36 Cal
- n
- 255
- Range
- 2.5 oz–25 oz
- Median
- 9.52 oz
- Material
- Grade 5 Titanium
- Finish / treatment
- Bead Blasted Natural, SOCOM Black, Gloss Black, Grey-Black Colt Flat, Burnt Bronze, Coyote Brown, Flat Brown, OD Green, Tan FDE
- Max caliber
- 9mm
- Rated cartridges
- .380 ACP, 9x19mm, .38 Special, .357 magnum, .350 Legend (subsonic only), .300 Blackout (subsonic only)
- Base interface
- Direct Thread (multiple)
- Full-auto rated
- Yes
- On .357 magnum
- 8″ minimum barrel
- On .350 Legend
- 8″ minimum barrel
- Subsonic loads only
- On .300 Blackout
- 8″ minimum barrel
- Subsonic loads only
- Maintenance
- Sealed (not user serviceable)
- Handgun booster
- Runs on a handgun without a booster
- MSRP
- $479
- Class
- 9mm / .36 Cal
- n
- 222
- Range
- $249–$2,888
- Median
- $800
Shorter than most 9mm / .36 Cal suppressors
Length compared against the 260 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Narrower than most 9mm / .36 Cal suppressors
Diameter compared against the 250 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most 9mm / .36 Cal suppressors
Weight compared against the 255 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most 9mm / .36 Cal suppressors
MSRP compared against the 222 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Is something on this page wrong?
- Base interface
- Direct Thread (multiple)
This suppressor threads straight onto the barrel, so no mount is required. 10 mounts in our catalog are thread adapters that let it run on other barrel threads.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Canine II was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Rated for .380 ACP, 9x19mm, .38 Special, .357 magnum, .300 Blackout subsonic, .350 Legend subsonic
- Full Auto Rated: Yes, keep suppressor under 800°F
- ~26 dBA dry (9mm subsonic tested 142.7 dBA muzzle / 137.0 dBA shooter's ear)
- User Serviceable: No
Show all 11 ▾ ▴
- Use of cast lead bullets is not recommended with sealed suppressors
- Can be wet or dry, and is light enough to eliminate the need for a booster
- Does not have any gel wipes or other wearable parts that will need replacement
- Not delicate like other subcompact 9mm cans
- Alpha extension or Canine booster is required for the necessary clearance to use self-contained 3 lug adapters
- Made entirely of 6Al-4V gr. 5 titanium, Canine II is a subcompact 9mm suppressor of tubeless construction
- ECCO does not recommend any of our suppressors for SIG Sauer handguns
Is one of these wrong, or does our wording say something the source doesn't?
