Fletcher Rifle WorksPermian
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- TBAC Summit Tested
length
6.5″
weight
14oz
MSRP
$550
length
6.5″
weight
14oz
calibers
6mm–9mm
material
Steel
interface
HUB 1.375x24
MSRP
$550
- Overall length
- 6.5″
- Diameter
- 1.62″
- Weight
- 14 oz
- Material
- 17-4 Stainless Steel
- Finish / treatment
- C series Cerakote
- Max caliber
- .30 Cal / 7.62mm
- Built for
- 9mm
- Base interface
- HUB 1.375x24
- MSRP
- $550
- Class
- .30 Cal / 7.62mm
- n
- 574
- Range
- $199–$2,380
- Median
- $990
Cheaper than most .30 Cal / 7.62mm suppressors
MSRP compared against the 574 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Is something on this page wrong?
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 494 mounts and 940 muzzle devices in our catalog fit this suppressor, including Fletcher Rifle Works Glasspack QD Adapter Set, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Permian was measured in 3 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
- .300 Blackout subsonic, 16" bolt-action rifle 2026125.8 dBat the ear · 23.9 dB quieter than the 2025 unsuppressed baseline55 tested →
- .308, 20" bolt-action rifle 2026129.8 dBat the ear · 26.1 dB quieter than the 2024 unsuppressed baseline50 tested →
- .308, 20" bolt-action rifle 2026132.6 dBat the ear · 23.3 dB quieter than the 2024 unsuppressed baseline50 tested →
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Caliber: 30 Cal, 6.5mm, 9mm
- Length: 6.5″ (no mount)
- Weight: ~14oz
- Diameter/OD: 1.62″
Show all 9 ▾ ▴
- Rear Thread Pattern: 1.375×24 HUB
- Finish: C series Cerakote
- All 17-4 Stainless Steel
- Shipped to your door from Capitol Armory
- What’s included in the box? Suppressor only
Is one of these wrong, or does our wording say something the source doesn't?
