Fletcher Rifle WorksPermian Ti
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- TBAC Summit Tested
length
6.5″
weight
8.5oz
MSRP
$750
length
6.5″
weight
8.5oz
calibers
6mm–9mm
material
Titanium
interface
HUB 1.375x24
MSRP
$750
- Overall length
- 6.5″
- Diameter
- 1.62″
- Weight
- 8.5 oz
- Class
- .30 Cal / 7.62mm
- n
- 639
- Range
- 4 oz–39.8 oz
- Median
- 13.7 oz
- Material
- Grade 5 Titanium
- Finish / treatment
- C series Cerakote
- Max caliber
- .30 Cal / 7.62mm
- Built for
- 9mm
- Base interface
- HUB 1.375x24
- MSRP
- $750
- Class
- .30 Cal / 7.62mm
- n
- 574
- Range
- $199–$2,380
- Median
- $990
Lighter than most .30 Cal / 7.62mm suppressors
Weight compared against the 639 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most .30 Cal / 7.62mm suppressors
MSRP compared against the 574 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Is something on this page wrong?
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 494 mounts and 940 muzzle devices in our catalog fit this suppressor, including Fletcher Rifle Works Glasspack QD Adapter Set, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Permian Ti was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Gas-operated rifles and carbines
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Caliber: 30 Cal, 6.5mm, 9mm
- Length: 6.5″ (no mount)
- Weight: ~8.5oz
- Diameter/OD: 1.62″
Show all 8 ▾ ▴
- Rear Thread Pattern: 1.375×24 HUB
- Finish: C series Cerakote
- All Grade 5 Titanium
- What’s included in the box? Suppressor only
Is one of these wrong, or does our wording say something the source doesn't?
