Fletcher Rifle WorksTexas Flood
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- TBAC Summit Tested
length
6.5″
weight
10oz
MSRP
$1,300
length
6.5″
weight
10oz
calibers
5.56–.30
material
Titanium
interface
HUB 1.375x24
MSRP
$1,300
- Overall length
- 6.5″
- Diameter
- 1.75″
- Weight
- 10 oz
- Class
- .30 Cal / 7.62mm
- n
- 621
- Range
- 4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- Ti DMLS 3D Printed
- Finish / treatment
- C series Cerakote
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Front cap
- OCL Infinity
- MSRP
- $1,300
- Class
- .30 Cal / 7.62mm
- n
- 557
- Range
- $199–$2,380
- Median
- $995
Lighter than most .30 Cal / 7.62mm suppressors
Weight compared against the 621 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Pricier than most .30 Cal / 7.62mm suppressors
MSRP compared against the 557 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- OCL Infinity
The HUB 1.375x24 is an open standard: 468 mounts and 882 muzzle devices in our catalog fit this suppressor, including Fletcher Rifle Works Glasspack QD Adapter Set, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Texas Flood was measured in 5 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Gas-operated rifles and carbines
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Length: 6.5″ (no mount)
- Weight: ~10oz
- Diameter/OD: 1.75″
- Rear Thread Pattern: 1.375×24 HUB
Show all 7 ▾ ▴
- Finish: C series Cerakote
- Ti DMLS 3D Printed Silencer
- What’s included in the box? Suppressor, 5.56 Solid end cap Ti, 30 Cal Solid end Cap Ti
