Fletcher Rifle WorksTexas Flood NRL
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Brake on the Front of the Suppressor
- TBAC Summit Tested
length
8.5″
weight
14oz
MSRP
$1,500
length
8.5″
weight
14oz
calibers
5.56–.30
material
Titanium
interface
HUB 1.375x24
MSRP
$1,500
- Overall length
- 8.5″
- Class
- .30 Cal / 7.62mm
- n
- 646
- Range
- 2.5″–14″
- Median
- 7.2″
- Diameter
- 1.75″
- Weight
- 14 oz
- Material
- Ti DMLS 3D Printed
- Finish / treatment
- C series Cerakote
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Front cap
- OCL Infinity
- Brake on the front
- The maker sells a brake end cap that screws onto the front of the suppressor
- Brakes that fit:
- Fletcher Rifle Works Recoil-X Comp Brake
- MSRP
- $1,500
- Class
- .30 Cal / 7.62mm
- n
- 574
- Range
- $199–$2,380
- Median
- $990
Longer than most .30 Cal / 7.62mm suppressors
Length compared against the 646 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Pricier than most .30 Cal / 7.62mm suppressors
MSRP compared against the 574 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Is something on this page wrong?
- Base interface
- HUB 1.375x24
- Front cap
- OCL Infinity
The HUB 1.375x24 is an open standard: 494 mounts and 940 muzzle devices in our catalog fit this suppressor, including Fletcher Rifle Works Glasspack QD Adapter Set, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Texas Flood NRL was measured in 2 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Recoil-X Brake
- Length: ~8.5in
- Weight: ~14oz
- Diameter/OD: 1.75″
Show all 8 ▾ ▴
- Rear Thread Pattern: 1.375×24 HUB
- Finish: C series Cerakote
- Ti DMLS 3D Printed Silencer
- What’s included in the box? Suppressor, Recoil-X Brake
Is one of these wrong, or does our wording say something the source doesn't?
