Fox Creek ArmsFX9-Ti
9mm / .36 Cal suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- TBAC Summit Tested
- Full-Auto Rated
- Sealed
length
6″
weight
5.5oz
MSRP
$650
length
6″
weight
5.5oz
calibers
.30 | 9mm
material
Titanium
interface
HUB 1.375x24
MSRP
$650
Photos
Image: Fox Creek Arms
- Overall length
- 6″
- Diameter
- 1.5″
- Weight
- 5.5 oz
- Class
- 9mm / .36 Cal
- n
- 255
- Range
- 2.5 oz–25 oz
- Median
- 9.52 oz
- Material
- Titanium
- Max caliber
- 9mm
- Rated cartridges
- 9mm, .300 Blackout
- Base interface
- HUB 1.375x24
- Full-auto rated
- Yes
- On 9mm
- Firing limit
- full auto
- On .300 Blackout
- 8″ minimum barrel
- full auto subsonic only
- Maintenance
- Sealed (not user serviceable)
- MSRP
- $650
Lighter than most 9mm / .36 Cal suppressors
Weight compared against the 255 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Is something on this page wrong?
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 494 mounts and 940 muzzle devices in our catalog fit this suppressor, including Fox Creek Arms Direct Thread Mount (1/2x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. FX9-Ti was measured in 2 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Full auto rated: yes. Fox Creek Arms rates the FX9-Ti for full auto with subsonic .300 Blackout and 9mm.
- 2025 Silencer Summit results, host Canik 9mm: ML 122.31 dBA, SE 129.88 dBA.
- 2025 Silencer Summit results, host Ruger American 300blk: ML 130.61 dBA, SE 125.24 dBA.
- The FX9-Ti is an exceptionally quiet titanium suppressor designed for both 9mm pistols and pistol caliber carbines. While it excels on 9mm, it is also highly effective on all .300 Blackout.
Show all 11 ▾ ▴
- Construction: precision machined, laser welded.
- HUB compatible: the 1-3/8x24 rear threads accept most standard direct thread mounts as well as QD mounts from other manufacturers, for example the Rearden Atlas and the Bravo ASR.
- The FX9-Ti is compatible with SiCo, YHM, and Resilient boosters and 3-Lugs. The depth of the mounting area limits other aftermarket mounting options and muzzle devices, so the direct thread mount is recommended for applications that do not require a booster or 3-lug.
- Material: Titanium.
- Covered for life against workmanship defect and general use. Damage caused by failure to follow barrel restrictions, bore and caliber sizing, or cool down recommendations may be subject to the cost of the repair. Cosmetic damage such as paint failure due to heat, scratches and dings is not covered.
- Comes with a 1/2x28 direct thread mount.
- Barrel restrictions by model (NR = no restrictions, FA = full auto rated): 9mm NR/FA, 300blk sub NR/FA, 300 blk super 8".
Is one of these wrong, or does our wording say something the source doesn't?
