GemtechAbyss 7.62 Direct Thread
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Low Backpressure
- Multi-Caliber
- Full-Auto Rated
length
6.8″
weight
16.2oz
MSRP
$749
length
6.8″
weight
16.2oz
calibers
5.56–.30
material
Titanium · Steel
interface
HUB 1.375x24
MSRP
$749
Photos
Image: Gemtech
- Overall length
- 6.8″
- Diameter
- 1.64″
- Weight
- 16.2 oz
- Material
- Stainless Steel, Titanium
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Backpressure
- Low
- Full-auto rated
- Yes
- Barrel restriction
- 3" minimum
- Gemtech publishes minimum barrel lengths for the Abyss 7.62 of 7" for 5.56 NATO/223 Rem, 7" for 6mm ARC, 3" for 5.7x28mm, 16" for 6.5 Creedmoor, 3" for 300BLK, 12" for 308Win, 7" for 7.62x39 and 16" for 300WM.
- MSRP
- $749
- Class
- .30 Cal / 7.62mm
- n
- 574
- Range
- $199–$2,380
- Median
- $990
Cheaper than most .30 Cal / 7.62mm suppressors
MSRP compared against the 574 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Is something on this page wrong?
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 494 mounts and 940 muzzle devices in our catalog fit this suppressor, including Gemtech Bi-Lock Quickmount HUB Adapter, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Caliber range from 5.7x28mm through 300 Win Mag.
- Features five of Gemtech's patent-pending technologies with a low-back-pressure design and GM-S1 end cap that minimizes muzzle flash.
- The Abyss 7.62 attaches via a 1.375-24 (HUB) rear with a direct-thread mount included.
- Short-barrel rated and full-auto rated; much greater wall thickness than many competitors at a similar or lesser system weight.
Show all 6 ▾ ▴
- Includes everything needed to mount and use the suppressor out of the box, with a HUB (1.375-24) and direct-thread mount.
- Gemtech publishes minimum barrel lengths for the Abyss 7.62 of 7" for 5.56 NATO/223 Rem, 7" for 6mm ARC, 3" for 5.7x28mm, 16" for 6.5 Creedmoor, 3" for 300BLK, 12" for 308Win, 7" for 7.62x39 and 16" for 300WM.
Is one of these wrong, or does our wording say something the source doesn't?
