Hammer CreekHC57T
.30 Cal / 7.62mm suppressor · 5/8x24 Direct Thread interface · specs and compatibility from the manufacturer
Notable features
- TBAC Summit Tested
- Direct Thread
length
5″
weight
5.6oz
MSRP
$1,000
length
5″
weight
5.6oz
calibers
5.56–.30
material
Titanium
interface
5/8x24 Direct Thread
MSRP
$1,000
- Overall length
- 5″
- Class
- .30 Cal / 7.62mm
- n
- 628
- Range
- 2.5″–14″
- Median
- 7.25″
- Diameter
- 1.5″
- Weight
- 5.6 oz
- Class
- .30 Cal / 7.62mm
- n
- 621
- Range
- 4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- Titanium
- Max caliber
- up to 300 Norma Mag
- Base interface
- 5/8x24 Direct Thread
- MSRP
- $1,000
Shorter than most .30 Cal / 7.62mm suppressors
Length compared against the 628 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most .30 Cal / 7.62mm suppressors
Weight compared against the 621 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- 5/8x24 Direct Thread
This suppressor threads straight onto the barrel, so no mount is required. 7 mounts in our catalog are thread adapters that let it run on other barrel threads.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. HC57T was measured in 3 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Caliber rating: 7.62, rated up to .300 Norma on a 20" barrel.
- Direct-thread installation: thread the suppressor on clockwise until it bottoms out snugly and hand tight on the shoulder behind the muzzle threads. If more than light finger pressure is required, stop immediately.
- Full-auto rated as long as it is kept under 800°F; shooters prioritising endurance over weight are pointed to the HD suppressors in 718 Inconel.
- The HC57 is among the most unobtrusive .30 cal suppressors on the market. At 5.6oz and 4.5" of added length to the host weapon system the HC57 is a go-to for truck guns, pig-guns and precision rifles alike.
