Hammer CreekHC97R
.30 Cal / 7.62mm suppressor · 5/8x24 Direct Thread interface · specs and compatibility from the manufacturer
Notable features
- TBAC Summit Tested
- Direct Thread
length
9″
weight
11.75oz
MSRP
$1,200
length
9″
weight
11.75oz
calibers
5.56–.30
material
Titanium
interface
5/8x24 Direct Thread
MSRP
$1,200
- Overall length
- 9″
- Class
- .30 Cal / 7.62mm
- n
- 646
- Range
- 2.5″–14″
- Median
- 7.2″
- Length added to the gun
- 3.93″
- How much longer the gun gets with the suppressor fitted, as the maker states it.
- Diameter
- 1.75″
- Weight
- 11.75 oz
- Material
- Titanium
- Finish / treatment
- FDE, Black, OD Green
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- 5/8x24 Direct Thread
- MSRP
- $1,200
- Class
- .30 Cal / 7.62mm
- n
- 574
- Range
- $199–$2,380
- Median
- $990
Longer than most .30 Cal / 7.62mm suppressors
Length compared against the 646 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Pricier than most .30 Cal / 7.62mm suppressors
MSRP compared against the 574 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Is something on this page wrong?
- Base interface
- 5/8x24 Direct Thread
This suppressor threads straight onto the barrel, so no mount is required. 12 mounts in our catalog are thread adapters that let it run on other barrel threads.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. HC97R was measured in 3 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
- .300 Blackout subsonic, 16" bolt-action rifle 2025131.5 dBat the ear · 18.2 dB quieter than unsuppressed84 tested →
- .308, 20" bolt-action rifle 2025137.0 dBat the ear · 18.9 dB quieter than the 2024 unsuppressed baseline70 tested →
- .300 Win Mag, 26" bolt-action rifle 2025139.3 dBat the ear · 17.9 dB quieter than unsuppressed67 tested →
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- The HC97R is a 3D-printed titanium reflex suppressor that extends only 3.93 inches beyond the muzzle while using a reflex design to maximize sound suppression and reduce recoil.
- Direct-thread installation: thread the suppressor on clockwise until it bottoms out snugly and hand tight on the shoulder behind the muzzle threads. If more than light finger pressure is required, stop immediately.
- Titanium construction ensures exceptional durability, heat resistance, and lightweight handling.
- Designed and optimized for bolt action rifles with hunters in mind; the 97R really shines on long-action cartridges.
Is one of these wrong, or does our wording say something the source doesn't?
