Liberty Precision MachineDuty 5.56
6mm / .243 suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- TBAC Summit Tested
- Full-Auto Rated
Where to buy
Prices update nightly
Guns.com
Shop links go to retailer sites; we may earn a commission. Prices shown as of our last check and may differ at checkout.
length
5.1″
weight
11.7oz
MSRP
$595
length
5.1″
weight
11.7oz
calibers
5.56 | 6mm
material
Steel
interface
HUB 1.375x24
MSRP
$595
Photos
Image: Liberty Precision Machine
- Overall length
- 5.1″
- Class
- 6mm / .243
- n
- 72
- Range
- 3″–8.8″
- Median
- 5.9″
- Diameter
- 1.75″
- Weight
- 11.7 oz
- Material
- 17-4 Stainless Steel
- Finish / treatment
- Black, FDE, OD Green
- Max caliber
- 6mm / .243
- Base interface
- HUB 1.375x24
- Front cap
- LPM 1x24 (removable)
- Full-auto rated
- Yes
- Barrel restriction
- 7.5" minimum
- MSRP
- $595
- Class
- 6mm / .243
- n
- 66
- Range
- $520–$1,529
- Median
- $963
Shorter than most 6mm / .243 suppressors
Length compared against the 72 6mm / .243 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most 6mm / .243 suppressors
MSRP compared against the 66 6mm / .243 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Is something on this page wrong?
- Base interface
- HUB 1.375x24
- Front cap
- LPM 1x24 (removable)
The HUB 1.375x24 is an open standard: 494 mounts and 940 muzzle devices in our catalog fit this suppressor, including AAC 51T S.T.A.M.P. Mount, AB Suppressor AB Raptor Adapter and Abel Co Direct Thread Adapter 1/2x28. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Duty 5.56 was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Gas-operated rifles and carbines
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- The LPM Duty 5.56 is a simplified version of the Torch 5.56/6mm that achieves a much lower price point and smaller size for budget minded shooters willing to tolerate slightly more back pressure and gas blowback.
- LPM highly recommends against the CAT Spooky 1 flash hider, as it results in premature baffle wear and excess flash out of the silencer.
Is one of these wrong, or does our wording say something the source doesn't?
