Lone Star SilencerVendetta
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- TBAC Summit Tested
length
7.94″
weight
11.6oz
length
7.94″
weight
11.6oz
calibers
5.56–.30
material
Titanium
interface
HUB 1.375x24
- Overall length
- 7.94″
- Diameter
- 1.49″
- Class
- .30 Cal / 7.62mm
- n
- 599
- Range
- 1.36″–2.74″
- Median
- 1.62″
- Weight
- 11.6 oz
- Material
- Grade 5 Titanium
- Finish / treatment
- High-temperature Cerakote
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
Narrower than most .30 Cal / 7.62mm suppressors
Diameter compared against the 599 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Not published by the manufacturer: MSRP.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 468 mounts and 882 muzzle devices in our catalog fit this suppressor, including Lone Star Silencer Direct Thread Adapter (1/2x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Vendetta was measured in 4 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Gas-operated rifles and carbines
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Maximum Cartridge Rating: Rated up to .300 Norma Magnum
- Thread Pitch: 1.375×24 TPI HUB (Bravo compatible)
- Mounting: HUB-compatible system with direct-thread adapter included
- Every Vendetta is precision CNC-machined from a single bar of Grade 5 titanium and built to exacting tolerances to ensure consistent bore alignment and system stability.
Show all 15 ▾ ▴
- All Lone Star Silencer HUB-compatible suppressors include both sealed and vented endcaps, allowing you to tune performance to your rifle and mission.
- Vented Endcap — Reduced Recoil & Gas: Vents excess gas forward to lower internal pressure, reducing backpressure and improving shootability on semi-autos.
- The silencer is HUB-Bravo compatible (1.375x24). This allows use of a wide variety of quick-detach mounts and muzzle devices.
- Material: CNC machined from a single bar of full Grade 5 titanium
- Finish: High-temperature Cerakote
- Warranty: Backed by the Quiet Confidence Guarantee
- Lifetime repair or replacement on defects, damage, or failures. No registration or hoops to jump through—your guarantee is automatic.
- Sealed Endcap — Maximum Suppression: Designed for the lowest possible decibel reduction. The sealed endcap fully contains propellant gases within the suppressor to minimize muzzle report, making it ideal for hunting, bolt guns, and noise-sensitive use.
- Included Mount: Ships with 5/8×24 direct-thread adapter
- What you should have in the box: Vendetta Silencer; Direct thread adapter (5/8x24); (1) Solid endcap; (1) Vented endcap; Endcap / HUB adapter tool; Owner's manual
- Barrel Restrictions: Minimum 12.5″ barrels for 5.56 NATO / .223 Rem; Minimum 16″ barrels for .308 Win; Minimum 20″ barrels for Magnum calibers (.300 Win. Mag. and similar)
