North Country ArmoryGannett RHS
.30 Cal / 7.62mm suppressor · Direct Thread (multiple) interface · specs and compatibility from the manufacturer
Notable features
- User Serviceable
- TBAC Summit Tested
- Direct Thread
length
8.5″
weight
23.5oz
length
8.5″
weight
23.5oz
calibers
5.56–.30
material
Titanium
interface
Direct Thread (multiple)
- Overall length
- 8.5″
- Class
- .30 Cal / 7.62mm
- n
- 628
- Range
- 2.5″–14″
- Median
- 7.25″
- Diameter
- 1.75″
- Weight
- 23.5 oz
- Class
- .30 Cal / 7.62mm
- n
- 621
- Range
- 4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- Titanium
- Max caliber
- .30
- Base interface
- Direct Thread (multiple)
- Maintenance
- User serviceable
Longer than most .30 Cal / 7.62mm suppressors
Length compared against the 628 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Heavier than most .30 Cal / 7.62mm suppressors
Weight compared against the 621 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Not published by the manufacturer: MSRP.
- Base interface
- Direct Thread (multiple)
This suppressor threads straight onto the barrel, so no mount is required. 13 mounts in our catalog are thread adapters that let it run on other barrel threads.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Gannett RHS was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Thermal imaging test: identical 10" AR-15s, same ammunition, 30, 60 and 90 rounds at ~2 rds/sec. "RHS suppressors measure approximately half the temperature of leading competitors, whether firing a single round or 90."
- Rather than using a traditional stacked and welded baffle system, the design is based on a monolithic core to improve structural integrity and reduce operational limitations.
- The core geometry also reduces back pressure compared to many traditional baffle designs, which can decrease carbon buildup.
- All suppressors are user-serviceable and can be disassembled for cleaning using optional service kits that include a mounting base and spanner wrench. No specialized chemicals are required for maintenance.
Show all 13 ▾ ▴
- The Reduced Heat Signature (RHS) Series combines characteristics of both the Slim and Max Core Series to prioritize thermal management while maintaining effective sound suppression. The RHS uses the same monolithic core design as other North Country Armory suppressors, with a 1.75-inch outer diameter.
- The internal core design reduces external heat buildup without relying on specialized coatings, resulting in a noticeably lower heat signature during firing. This helps improve thermal optic performance and reduces scope mirage during extended shooting sessions. In many cases, the suppressor remains cool enough to handle after multiple shots with larger cartridges.
- Internal heat management, as imaged: the baffle core is hottest, the internal tube is next, and the outer tube is coolest.
- After testing multiple configurations, a slot-and-pocket-style mono core was selected. The core is manufactured from titanium due to its high strength-to-weight ratio, allowing the suppressor to remain lightweight while maximizing strength and longevity, all while maintaining excellent sound suppression.
- In the event of a baffle strike, the suppressor is less likely to experience catastrophic failure, as the continuous titanium core structure helps redirect the projectile with limited damage.
- Limited lifetime warranty: North Country Armory warrants to the original purchaser that the suppressor will be free from defects in material and workmanship under normal use and service for the life of the purchaser. The warranty is non-transferable and does not cover misuse, unauthorized modifications, normal wear, improper installation, an improperly threaded barrel, or reloaded or non-standard ammunition.
- Headquartered in Gillette, Wyoming, with an additional location in Havre, Montana, we design and machine every suppressor in house. North Country Armory is proud to build American-made suppressors for sportsmen and shooting enthusiasts.
- The mono core allows compatibility with nearly all SAMMI-spec cartridges and eliminates barrel length restrictions, except for certain high-powered .30 caliber applications.
- Service manual: the baffle core threads out of the suppressor tube and is torqued to 30 lb/ft on reassembly. DO NOT attempt to remove the thread adapter from the tube — removing it may cause irreversible damage to the tube or thread adapter, and such damage will void your warranty.
