NoveskeAmigo
6mm / .243 suppressor · Noveske KX3 interface · specs and compatibility from the manufacturer
Notable features
- TBAC Summit Tested
- Haynes 282
length
3″
weight
11.7oz
MSRP
$850
length
3″
weight
11.7oz
calibers
5.56 | 6mm
material
Haynes 282
interface
Noveske KX3
MSRP
$850
- Overall length
- 3″
- Class
- 6mm / .243
- n
- 72
- Range
- 3″–8.8″
- Median
- 5.9″
- Length added to the gun
- 3″
- How much longer the gun gets with the suppressor fitted, as the maker states it.
- Diameter
- 1.49″
- Class
- 6mm / .243
- n
- 67
- Range
- 1.49″–1.83″
- Median
- 1.63″
- Weight
- 11.7 oz
- Material
- 3D Printed Haynes 282
- Max caliber
- 6mm ARC
- Base interface
- Noveske KX3
- Barrel restriction
- 10.5" minimum
- MSRP
- $850
Shorter than most 6mm / .243 suppressors
Length compared against the 72 6mm / .243 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Narrower than most 6mm / .243 suppressors
Diameter compared against the 67 6mm / .243 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Is something on this page wrong?
- Base interface
- Noveske KX3
This suppressor's Noveske KX3 takes no separate mount. 1 muzzle device in our catalog attach to it directly.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Amigo was measured in 2 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Gas-operated rifles and carbines
Host not documented
- 5.56 (host not documented) 2025139.6 dBat the ear2 tested
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- The Amigo is purpose-built for the Noveske 4th-generation 5.56 Infidel and interfaces with the KX3 ″Flaming Pig″ muzzle device to turn it into a suppressor-ready platform.
- Adding only 3 inches beyond the KX3 and measuring just 1.49″ in diameter, the Amigo is one of the shortest suppressed pin-and-weld 5.56 rifles available.
- The Amigo weighs 11.7 ounces, preserving the rifle's balance while reducing sound and recoil.
- The Amigo is 3D-printed from Haynes 282 for an exceptional strength-to-weight ratio.
Show all 6 ▾ ▴
- The Amigo is rated up to 6mm ARC (alignment-rod verification required) and calls for a minimum 10.5″ barrel.
- The Amigo ships with a KX3-1/2x28 muzzle device, a 3/4″ wrench, a KX3 cone wrench, and a user guide.
Is one of these wrong, or does our wording say something the source doesn't?
