Off Grid SuppressorsScorpius
.22 Cal / Rimfire suppressor · 1/2x28 Direct Thread interface · specs and compatibility from the manufacturer and independent testers
Notable features
- Multi-Caliber
- Runs on a Handgun Without a Booster
- PEW Science Reviewed
- TBAC Summit Tested
- Full-Auto Rated
- Sealed
- Direct Thread
length
5″
weight
1.95oz
MSRP
$470
length
5″
weight
1.95oz
calibers
.22 rimfire
material
Titanium
interface
1/2x28 Direct Thread
MSRP
$470
- Overall length
- 5″
- Diameter
- 1″
- Weight
- 1.95 oz
- Class
- .22 Cal / Rimfire
- n
- 164
- Range
- 0.9 oz–13.5 oz
- Median
- 4.2 oz
- Material
- Titanium
- Finish / treatment
- Cerakote
- Max caliber
- .22 LR to 5.7x28
- Base interface
- 1/2x28 Direct Thread
- Front cap
- Fixed
- Full-auto rated
- Yes
- Maintenance
- Sealed (not user serviceable)
- MSRP
- $470
- Class
- .22 Cal / Rimfire
- n
- 147
- Range
- $99–$1,000
- Median
- $400
Lighter than most .22 Cal / Rimfire suppressors
Weight compared against the 164 .22 Cal / Rimfire suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Pricier than most .22 Cal / Rimfire suppressors
MSRP compared against the 147 .22 Cal / Rimfire suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- 1/2x28 Direct Thread
- Front cap
- Fixed
This suppressor threads straight onto the barrel, so no mount is required. 6 mounts in our catalog are thread adapters that let it run on other barrel threads.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Scorpius was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Pistols
Measurements published by Thunder Beast Arms Corp. How to read these
Measured sound results are in the Sound tests section above.
PEW Science · independent test
This suppressor has been independently sound-tested by PEW Science.
Manufacturer claim
- Ranked #1 at the Thunderbeast Silencer Summit, the Scorpius sets a new standard in acoustic performance.
- The Scorpius is a fully titanium rimfire suppressor optimized for .22 LR and rated up to 5.7x28mm, weighing just 1.95 oz. It measures 5 inches long and 1 inch in diameter with a 1/2 x 28 thread pitch, and mounts direct thread.
- The Scorpius features a non-serviceable design with no disassembly required. To clean it, place it in an ultrasonic cleaner.
- Using advanced 3D design and additive manufacturing, Off Grid Suppressors delivers suppression in a compact, featherlight titanium form. Its patented internals reduce sound while maximizing efficiency.
Show all 9 ▾ ▴
- Off Grid suppressors are printed as a single-piece design. Unlike suppressors made from multiple threaded or welded components, monolithic construction eliminates weak points and increases overall structural integrity. Each suppressor is finished with a high quality Cerakote that is extremely durable and performs under high temperatures.
- All Off Grid Suppressors are single piece units with non-removable parts, and the suppressors are direct thread units. There are no parts inside the suppressor as it is manufactured as one unit. Off Grid provides a limited lifetime warranty against all manufacturing defects.
- Caliber: .22 LR / .22 MAG / .17 HMR / 5.7x28. Finished in black Cerakote, full-auto rated, with a lifetime warranty.
- For rimfire shooters, the Scorpius is an excellent option for .22 LR, .22 Magnum, 17 HMR and 5.7x28. Occasional cleaning may be recommended after extended use; an ultrasonic cleaner with a titanium-safe solution is recommended if cleaning becomes necessary.
- Always use good quality factory new ammunition. Avoid using Wildcat or reloaded ammunition with your Off Grid suppressor — use of low quality or reloaded ammunition is not covered by the warranty. Check thread tightness often; all direct thread suppressors will loosen up with use, and a loose suppressor will shift the point of impact and can also result in baffle strikes.
