PTRVENT 1
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer and independent testers
Notable features
- HUB Compatible
- Low Backpressure
- PEW Science Reviewed
- TBAC Summit Tested
- Full-Auto Rated
length
8.74″
weight
12.3oz
MSRP
$1,499
length
8.74″
weight
12.3oz
calibers
5.56–.30
material
Titanium
interface
HUB 1.375x24
MSRP
$1,499
- Overall length
- 8.74″
- Class
- .30 Cal / 7.62mm
- n
- 628
- Range
- 2.5″–14″
- Median
- 7.25″
- Diameter
- 1.75″
- Weight
- 12.3 oz
- Material
- Titanium
- Finish / treatment
- PVD
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
- Backpressure
- Low
- Full-auto rated
- Yes
- MSRP
- $1,499
- Class
- .30 Cal / 7.62mm
- n
- 557
- Range
- $199–$2,380
- Median
- $995
Longer than most .30 Cal / 7.62mm suppressors
Length compared against the 628 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Pricier than most .30 Cal / 7.62mm suppressors
MSRP compared against the 557 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
The HUB 1.375x24 is an open standard: 468 mounts and 882 muzzle devices in our catalog fit this suppressor, including PTR VENT 1/2x28 Direct Thread Adapter, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. VENT 1 was measured in 3 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Gas-operated rifles and carbines
Measurements published by Thunder Beast Arms Corp. How to read these
Measured sound results are in the Sound tests section above.
PEW Science · independent test
This suppressor has been independently sound-tested by PEW Science.
Manufacturer claim
- Rated: Full-Auto Capable
- Additional Features: Suppressor is threaded 1 3/8 x 24 for optional adapter, Patented 3D-printed monolithic structure with Purposely Induced Porosity™
- The PTR VENT™ 1 – 7.62×51mm Suppressor is engineered to redefine what modern rifle suppression looks like.
- The result is a smoother shooting experience, improved weapon reliability, and consistent suppression across a wide range of platforms.
Show all 8 ▾ ▴
- At 8.74 inches in length and weighing 12.3 ounces, the VENT 1 balances suppression performance with practical handling.
- Overall Finish: PVD Coating
- Constructed from a monolithic, 3D-printed titanium body, the VENT 1 offers high structural strength with efficient thermal management under sustained fire.
- Supplied Adapter: Direct Thread, Thread Pitch 5/8 x 24
