RuggedMicro30
.30 Cal / 7.62mm suppressor · Rugged Dual Taper interface · specs and compatibility from the manufacturer
Notable features
- No Barrel Restrictions
- Modular Length
- TBAC Summit Tested
- Stellite
length
5–6.5″
weight
15.1oz
MSRP
$1,104
length
5–6.5″
weight
15.1oz
calibers
5.56–.30
material
Steel · Stellite
interface
Rugged Dual Taper
MSRP
$1,104
- Overall length
- 6.5″
- Diameter
- 1.5″
- Weight
- 15.1 oz
- Material
- Baffles: Cobalt 6 Tube: 17-4 PH Stainless Steel Mount: 17-4 PH Stainless Steel
- Finish / treatment
- Cerakote
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- Rugged Dual Taper
- Front cap
- Rugged Front Cap Thread
- Barrel restriction
- None (manufacturer stated)
- Caliber rating: Belt Fed Rated® with no barrel length restrictions Center-fire Rifle up to .300 RUM.
- MSRP
- $1,104
Configurations
- Standard6.5″ · 15.1oz
- Short5″ · 11.8oz
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- Rugged Dual Taper
- Front cap
- Rugged Front Cap Thread
This suppressor's Rugged Dual Taper takes no separate mount. 26 muzzle devices in our catalog attach to it directly.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Micro30 was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Ratings: Belt Fed Rated® / No Barrel Length Restrictions.
- Features: Interchangeable Front Caps (7.62mm and 5.56mm available) Monolithic 17-4 PH Stainless Steel Mount Quick Detach Dual Taper Locking System™ Unconditional Lifetime Warranty.
- The Micro30 is designed for scenarios where length takes priority.
- As such, the Micro30's short config adds less than 3.5″ to the end of the muzzle device and when additional suppression is needed, simply attach the ADAPT™ Module for a quieter suppressor in seconds compared to months.
Show all 8 ▾ ▴
- Micro30™ Caliber Ratings Belt Fed Rated® with no barrel length restrictions Center-fire Rifle up to .300 RUM The Micro30 is designed for scenarios where length takes priority.
- Finish: Cerakote.
- Includes: M2 Brake (5/8×24 Thread Pitch) 7.62 Front Cap Micro30 Suppressor Operator’s Manual ADAPT Module Micro30 Logo Sticker End Cap Tool.
- Caliber rating: Belt Fed Rated® with no barrel length restrictions Center-fire Rifle up to .300 RUM.
