Silencer CentralMeatEater by Banish
.30 Cal / 7.62mm suppressor · 5/8x24 Direct Thread interface · specs and compatibility from the manufacturer
Notable features
- TBAC Summit Tested
- Direct Thread
Where to buy
Prices update nightly
Ammunition Depot
Shop links go to retailer sites; we may earn a commission. Prices shown as of our last check and may differ at checkout.
length
5.85″
weight
10.3oz
MSRP
$1,299
length
5.85″
weight
10.3oz
calibers
5.56–.30
material
Titanium
interface
5/8x24 Direct Thread
MSRP
$1,299
Photos
Image: Silencer Central
- Overall length
- 5.85″
- Class
- .30 Cal / 7.62mm
- n
- 646
- Range
- 2.5″–14″
- Median
- 7.2″
- Diameter
- 1.73″
- Weight
- 10.3 oz
- Class
- .30 Cal / 7.62mm
- n
- 639
- Range
- 4 oz–39.8 oz
- Median
- 13.7 oz
- Material
- Titanium
- Finish / treatment
- Sniper Gray, Cerakote
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- 5/8x24 Direct Thread
- Front cap
- Fixed
- MSRP
- $1,299
- Class
- .30 Cal / 7.62mm
- n
- 574
- Range
- $199–$2,380
- Median
- $990
Shorter than most .30 Cal / 7.62mm suppressors
Length compared against the 646 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most .30 Cal / 7.62mm suppressors
Weight compared against the 639 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Pricier than most .30 Cal / 7.62mm suppressors
MSRP compared against the 574 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Is something on this page wrong?
- Base interface
- 5/8x24 Direct Thread
- Front cap
- Fixed
This suppressor threads straight onto the barrel, so no mount is required. 12 mounts in our catalog are thread adapters that let it run on other barrel threads.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. MeatEater by Banish was measured in 3 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
- .308, 20" bolt-action rifle 2025131.1 dBat the ear · 24.8 dB quieter than the 2024 unsuppressed baseline70 tested →
- .300 Blackout subsonic, 16" bolt-action rifle 2026127.2 dBat the ear · 22.5 dB quieter than the 2025 unsuppressed baseline55 tested →
- .300 Win Mag, 26" bolt-action rifle 2026135.5 dBat the ear · 21.7 dB quieter than the 2025 unsuppressed baseline38 tested →
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Sound reduction: 32 dB
- SUPPRESSES RECOIL AS WELL AS SOUND: The internal baffles handle the gas in such a way that the suppressor significantly reduces recoil as well as sound.
- MULTI-CALIBER DESIGN: All BANISH® suppressors accommodate calibers that are smaller in diameter than marked.
- MADE IN USA: 100% made and assembled in the United States.
Show all 9 ▾ ▴
- BANISH® partnered with the crew from MeatEater to develop an all-new silencer that exceeded expectations – the MeatEater by BANISH® (Patent Pending).
- The compact and lightweight silencer incorporates key elements from other BANISH® suppressors, with specific requirements from MeatEater.
- The result is a .30-caliber silencer that will blow your mind, but not your hearing.
- One of the important things MeatEater stressed was recoil reduction.
- 100% TITANIUM: Made from an extremely sturdy titanium alloy, the Meateater by BANISH weighs only 10.3 oz, yet is tough enough for years of service to a frequent shooter.
Is one of these wrong, or does our wording say something the source doesn't?
