TBAC22 Take Down
5.56mm / .223 suppressor · 1/2x28 Direct Thread interface · specs and compatibility from the manufacturer
Notable features
- TBAC Summit Tested
- Full-Auto Rated
- Direct Thread
length
4.8″
weight
4.8oz
MSRP
$425
length
4.8″
weight
4.8oz
calibers
5.56
material
Titanium · Steel
interface
1/2x28 Direct Thread
MSRP
$425
- Overall length
- 4.8″
- Class
- 5.56mm / .223
- n
- 384
- Range
- 2.5″–9.75″
- Median
- 6.1″
- Diameter
- 0.98″
- Class
- 5.56mm / .223
- n
- 370
- Range
- 0.98″–2.2″
- Median
- 1.6″
- Weight
- 4.8 oz
- Class
- 5.56mm / .223
- n
- 381
- Range
- 1.7 oz–28 oz
- Median
- 13 oz
- Material
- Grade 9 Titanium and 17-4 Stainless
- Finish / treatment
- Cerakote
- Max caliber
- 5.7mm
- Base interface
- 1/2x28 Direct Thread
- Front cap
- Fixed
- Full-auto rated
- Yes
- MSRP
- $425
- Class
- 5.56mm / .223
- n
- 335
- Range
- $199–$1,955
- Median
- $899
Shorter than most 5.56mm / .223 suppressors
Length compared against the 384 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Narrower than most 5.56mm / .223 suppressors
Diameter compared against the 370 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most 5.56mm / .223 suppressors
Weight compared against the 381 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most 5.56mm / .223 suppressors
MSRP compared against the 335 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- 1/2x28 Direct Thread
- Front cap
- Fixed
This suppressor threads straight onto the barrel, so no mount is required. 6 mounts in our catalog are thread adapters that let it run on other barrel threads.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. 22 Take Down was measured in 2 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Pistols
- .22LR pistol (Sig P322) 2024122.4 dBat the ear4 tested
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Threads: 1/2-28 standard rimfire (0.400″ length).
- Use: Multi-purpose, heavy-duty, full-auto rated.
- Multi-purpose heavy-duty take-down .22 Suppressor The second-generation 22 TAKE DOWN takes the solid performance of the original 22 TAKE DOWN and shrinks it smaller and lighter: 4.8 inches long and 4.8 ounces in weight!
- The GEN2's suppression performance on .22LR rifle is the same as the original; but on semi-auto .22LR pistols, it's about 1 dB quieter.
Show all 8 ▾ ▴
- GEN2 22 TAKE DOWNs can be identified by having a serial number higher than TD10000.
- This multi-purpose, heavy-duty small-caliber suppressor works great on pistols and rifles chambered in .22 LR, .22 WMR, .17 HMR, 5.7x28, and similar calibers.
- Finish: Black CeraKote; OD Green or FDE available.
- Caliber: .22 LR, .22 WMR, .17 HMR, 5.7x28.
