Wolfpack ArmoryDisruptor 30
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- TBAC Summit Tested
length
6.25″
weight
10.9oz
MSRP
$619
length
6.25″
weight
10.9oz
calibers
5.56–.30
material
Steel
interface
HUB 1.375x24
MSRP
$619
- Overall length
- 6.25″
- Class
- .30 Cal / 7.62mm
- n
- 628
- Range
- 2.5″–14″
- Median
- 7.25″
- Diameter
- 1.61″
- Weight
- 10.9 oz
- Material
- 17-4 Stainless Steel
- Finish / treatment
- Cerakote C-Series
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Front cap
- 1.125x28
- MSRP
- $619
- Class
- .30 Cal / 7.62mm
- n
- 557
- Range
- $199–$2,380
- Median
- $995
Shorter than most .30 Cal / 7.62mm suppressors
Length compared against the 628 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most .30 Cal / 7.62mm suppressors
MSRP compared against the 557 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- 1.125x28
The HUB 1.375x24 is an open standard: 468 mounts and 882 muzzle devices in our catalog fit this suppressor, including Wolfpack Armory Low Profile HUB Adapter, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Disruptor 30 was measured in 2 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- The blast chamber is threaded 1.375"x24 so all HUB threaded adapters will work on the Disruptor 30.
- The Disruptor 30 also features a threaded endcap (1.125"x28) that is compatible with many endcaps on the market.
- The new Disruptor 30 features improved baffle design specifically for .30 caliber.
- Caliber: Up to .30 Cal. Weight: 10.9oz. (excluding mounting adapter). Length: 6.25". Diameter: 1.61".
Show all 9 ▾ ▴
- Material: 17-4 Stainless Steel.
- Construction: Fully tig welded.
- Finish: C Series Cerakote.
- Warranty: Lifetime.
- Comes factory with our Low Profile Plan B adapter and 5/8x24 Night Howler flash hider.
