Wolfpack ArmoryDisruptor 30L
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- TBAC Summit Tested
length
7.75″
weight
13.8oz
MSRP
$759
length
7.75″
weight
13.8oz
calibers
5.56–.30
material
Steel
interface
HUB 1.375x24
MSRP
$759
- Overall length
- 7.75″
- Diameter
- 1.61″
- Weight
- 13.8 oz
- Material
- 17-4 Stainless Steel
- Finish / treatment
- Cerakote C-Series
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Front cap
- 1.125x28
- MSRP
- $759
- Class
- .30 Cal / 7.62mm
- n
- 574
- Range
- $199–$2,380
- Median
- $990
Cheaper than most .30 Cal / 7.62mm suppressors
MSRP compared against the 574 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Is something on this page wrong?
- Base interface
- HUB 1.375x24
- Front cap
- 1.125x28
The HUB 1.375x24 is an open standard: 494 mounts and 940 muzzle devices in our catalog fit this suppressor, including Wolfpack Armory Low Profile HUB Adapter, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Disruptor 30L was measured in 2 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- The blast chamber is threaded 1.375"x24 so all HUB threaded adapters will work on the Disruptor 30L.
- The Disruptor 30L also features a threaded endcap (1.125"x28) that is compatible with many endcaps on the market.
- Caliber: Up to .30 Cal. Weight: 13.8oz. (excluding mounting adapter). Length: 7.75". Diameter: 1.61".
- Material: 17-4 Stainless Steel.
Show all 9 ▾ ▴
- Construction: Fully tig welded.
- Finish: C Series Cerakote.
- Warranty: Lifetime.
- The Disruptor 30L is built to withstand the toughest conditions while remaining light enough for easy maneuverability, whether you are out hunting or practicing at the range.
- Comes factory with our Low Profile Plan B adapter and 5/8x24 Night Howler flash hider.
Is one of these wrong, or does our wording say something the source doesn't?
