Wolfpack ArmoryDisruptor 556
5.56mm / .223 suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer and independent testers
Notable features
- HUB Compatible
- PEW Science Reviewed
- TBAC Summit Tested
length
5.75″
weight
9.4oz
MSRP
$599
length
5.75″
weight
9.4oz
calibers
5.56
material
Steel
interface
HUB 1.375x24
MSRP
$599
- Overall length
- 5.75″
- Diameter
- 1.61″
- Weight
- 9.4 oz
- Class
- 5.56mm / .223
- n
- 381
- Range
- 1.7 oz–28 oz
- Median
- 13 oz
- Material
- 17-4 Stainless Steel
- Finish / treatment
- Cerakote C-Series
- Max caliber
- 5.56mm / .223
- Base interface
- HUB 1.375x24
- Front cap
- 1.125x28
- Backpressure
- High
- Barrel restriction
- 10.5" minimum
- Minimum Barrel Length: 10.5".
- Baffles
- 6
- MSRP
- $599
- Class
- 5.56mm / .223
- n
- 335
- Range
- $199–$1,955
- Median
- $899
Lighter than most 5.56mm / .223 suppressors
Weight compared against the 381 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most 5.56mm / .223 suppressors
MSRP compared against the 335 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- 1.125x28
The HUB 1.375x24 is an open standard: 468 mounts and 882 muzzle devices in our catalog fit this suppressor, including Wolfpack Armory Low Profile HUB Adapter, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Disruptor 556 was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Gas-operated rifles and carbines
Measurements published by Thunder Beast Arms Corp. How to read these
Measured sound results are in the Sound tests section above.
PEW Science · independent test
This suppressor has been independently sound-tested by PEW Science.
Manufacturer claim
- The blast chamber is threaded 1.375"x24 so all HUB threaded adapters will work on the Disruptor 556.
- The Disruptor 556 also features a threaded endcap (1.125"x28) that is compatible with many endcaps on the market.
- Caliber: 5.56 Cal. Weight: 9.4oz. (excluding mounting adapter). Length: 5.75". Diameter: 1.61".
- Material: 17-4 Stainless Steel.
Show all 10 ▾ ▴
- Construction: Fully tig welded.
- Finish: C Series Cerakote.
- Warranty: Unlimited Lifetime.
- The Disruptor 556 is built to withstand the toughest conditions while remaining short and light enough for easy maneuverability.
- Comes factory with our Low Profile Plan B adapter and 1/2x28 Night Howler flash hider.
- Minimum Barrel Length: 10.5".
