Wolfpack ArmoryDisruptor 556K
5.56mm / .223 suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- TBAC Summit Tested
length
4.75″
weight
7.8oz
MSRP
$559
length
4.75″
weight
7.8oz
calibers
5.56
material
Steel
interface
HUB 1.375x24
MSRP
$559
- Overall length
- 4.75″
- Class
- 5.56mm / .223
- n
- 384
- Range
- 2.5″–9.75″
- Median
- 6.1″
- Diameter
- 1.61″
- Weight
- 7.8 oz
- Class
- 5.56mm / .223
- n
- 381
- Range
- 1.7 oz–28 oz
- Median
- 13 oz
- Material
- 17-4 Stainless Steel
- Finish / treatment
- Cerakote C-Series
- Max caliber
- 5.56mm / .223
- Base interface
- HUB 1.375x24
- Front cap
- 1.125x28
- Barrel restriction
- 10.5" minimum
- Minimum Barrel Length: 10.5".
- MSRP
- $559
- Class
- 5.56mm / .223
- n
- 335
- Range
- $199–$1,955
- Median
- $899
Shorter than most 5.56mm / .223 suppressors
Length compared against the 384 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most 5.56mm / .223 suppressors
Weight compared against the 381 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most 5.56mm / .223 suppressors
MSRP compared against the 335 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- 1.125x28
The HUB 1.375x24 is an open standard: 468 mounts and 882 muzzle devices in our catalog fit this suppressor, including Wolfpack Armory Low Profile HUB Adapter, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Disruptor 556K was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Gas-operated rifles and carbines
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- The blast chamber is threaded 1.375"x24 so all HUB threaded adapters will work on the Disruptor 556K.
- The Disruptor 556K also features a threaded endcap (1.125"x28) that is compatible with many endcaps on the market.
- Caliber: 5.56 Cal. Weight: 7.8oz. (excluding mounting adapter). Length: 4.75". Diameter: 1.61".
- Material: 17-4 Stainless Steel.
Show all 10 ▾ ▴
- Construction: Fully tig welded.
- Finish: C Series Cerakote.
- Warranty: Unlimited Lifetime.
- With its advanced baffle design and engineering, the Disruptor 556K is the perfect addition to any firearm for those looking to reduce noise and flash signature.
- Comes factory with our Low Profile Plan B adapter and 1/2x28 Night Howler flash hider.
- Minimum Barrel Length: 10.5".
